Overland Storage REO 9000 Working with the REO, Logging On from Any System with Network Access

10

CHAPTER

Working with the REO 9000

This chapter provides a few tips on working with the REO Appliance including:

„Logging on to the Web interface.

„Reviewing the information displayed in the REO Device Summary.

„Switching from one configuration to another.

„Understanding how disk drives are numbered.

„Powering down the REO Appliance.

Logging On from Any System with Network Access

After you have completed configuration of the REO Appliance, you can access the REO Appliance console from any system that has network access to the IP address of the Management Port.

1Choose one of the following:

„If you are using DHCP, using the management system, access the mapped drive \\REO\programs, and then double-click the Overland.html file.

„If you are not using DHCP, in your Web browser, type the IP address assigned to the Management Port for the REO Appliance.

Tip: You can also use the IP addresses assigned to the Data Ports, which you can do even if you are using DHCP.

2When the prompt appears, type your name and password (the defaults are Administrator and system) in case-sensitive format.

Working with the REO 9000 W 99