Overland Storage REO 9000 with ProtectionPAC Software

6At the front of the rack, lift the REO Appliance to its installed height, engage the inner slides mounted on the REO Appliance with the intermediate slides protruding from the rack, and slide the REO Appliance toward the rack until the inner slide-lock engages the intermediate slide.

This leaves the entire REO Appliance protruding from the rack, locked in position, supported by the slide rails.

Caution: With one unit installed in the rack and in the extended position, support might be required (to prevent the rack from tipping) until the unit is pushed completely into the rack. (The unit is shown in the middle of the rack for clarity.)

REO90003

7Press inward (toward the chassis) on each of the inner slide-locks to permit the intermediate slides to move toward the rack.

8Slide the REO Appliance in and out several times, ensuring that the inner and outer slide locks engage, and that the REO Appliance chassis does not bind against the slides.

REO90001

24 X Setting Up the REO 9000

Page 24
Image 24
Overland Storage REO 9000 setup guide REO90001