Broilmaster Important Information, Tools Required, SKFB2-1 & SKFPB2-1 H ardware P ackage

Important Information

Thank you for choosing a Broilmaster Premium Gas Grill. This shelf kit has been designed to fit perfectly and function flawlessly – to provide years of service.

Please read the entire manual and compare the parts list to the parts provided with this kit before you begin the installation. If this shelf kit is missing any parts, contact your Broilmaster dealer. Keep this manual in a safe place to help you identify and order repair parts if they are ever required.

This manual covers the SKSS2 stationary shelf and the SKFPB2 and SKFB2 folding shelves. Refer to the illustration for your shelf, and follow the instructions carefully.

NOTE: These side shelves are designed to support approximately 25 pounds. Exceeding this weight limit may cause damage and void the warranty.

CAUTION: Parts may have sharp edges. Wear leather work gloves and handle parts carefully.

To order repair parts, contact your Broilmaster dealer. See the dealer locator at www.broilmaster.com. When ordering parts, please have the following information available: Grill Model Number, Shelf Model Number, Part Number and Description, and Quantity or Parts needed.

Tools Required

•Phillips Screwdriver

•7/16-inch Socket and Ratchet or 7/16-inch Nut Driver

SKSS2-1 Hardware Package Contents	SKFB2-1 & SKFPB2-1 Hardware Package
	Contents

B076330 HEX HEAD BOLT 1/4-20 X 1 1/2

B073978 TRUSS HEAD SCREW #10-24 X 1

B076332 FLAT WASHER 9/32 ID X 5/8 OD

B076331 HEX NUT 1/4-20

B076333 LOCK WASHER 1/4 ID X 5/8 OD

Page 2

B100770 PHILLIPS SCREW 10-16 X 1

B072217 PHILLIPS TRUSS HEAD SCREW 1/4-20 X 3/4

B076332 9/32 ID X 5/8 OD FLAT WASHER

B076333 1/4 ID X 5/8 OD LOCK WASHER

B076331 1/4-20 HEX NUT

B101559-3-0611