Brother 1300 manual Tings, press BS, Press Home or, To add a special character to the barcode data

☞To return to the barcode data display without changing any parameter set-

Clear

tings, press BS .

4Press or until the parameter that you wish to change appears.

5 Press Home or	until the desired setting is displayed.
	End

6Repeat steps 4 and 5 until all parameters are set as you wish.

Memory

7Press .

To add a special character to the barcode data:

8Press or until the cursor is below the character immediately to the

right of where you want to add special character.

Feed

9Press Sym. .

0Press Home or until the desired special character is displayed.

End

☞The following special characters can only be entered when using proto- cols CODE 39 or CODABAR.

Symbol Character

1+

2$

The following special characters can only be entered when using proto- cols EAN 128 and CODE128.

VALUE	SPECIAL	VALUE	SPECIAL	VALUE	SPECIAL
	CHARACTER		CHARACTER		CHARACTER
3	#	69	ENQ	87	ETB
4	$	70	ACK	88	CAN
11	+	71	BEL	89	EM
28	<	72	BS	90	SUB
29	=	73	HT	91	ESC

50