For Wireless Network Users
Connecting the Brother machine to the wireless network
Configure the wireless
18 settings (Typical Wireless Setup in infrastructure mode)
a On your machine, press Menu, 7 (Network), 2 (WLAN), 2 (Setup Wizard).
Press 
or 
to choose On, then press OK.
b The machine will search for available SSIDs. If
a list of SSIDs is displayed, use | or |
to choose the SSID you wrote down in step 17 on page 32, then press OK. Go to step f.
Note
It will take several seconds to display a list of available SSIDs.
If your access point is set to not broadcast the SSID you will have to manually add the SSID name. Go to step c.
c Press 
or 
to choose <New SSID> and press OK. Go to step d.
d Enter the SSID you wrote down in step 17 on page 32 using the dial pad to choose each letter or number.
You can use 
and 
to move the cursor left and right. For example, to enter the letter a, press the 2 key on the dial pad once. To enter the number 3, press the 3 key on the dial pad seven times.
The letters appear in this order: lower case, upper case and then numbers.
(For more information, see Entering Text for Wireless Settings on page 46.)
Press OK when you have entered all the characters.
e Press 
or 
to choose
Infrastructure, then press OK.
f
g
Use the 
, 
and OK keys to choose
one of the options below: If your network is configured for Authentication and Encryption you must match the settings used for your network.
No Authentication or Encryption: Choose Open System, press OK then use
or 
to choose None for
Encryption Type? and press OK. Then
press 1 for Yes to apply your settings. Go to step k.
No Authentication with WEP Encryption: Choose Open System, press OK then use
or 
to choose WEP for the
Encryption Type? and press OK. Go to step g.
Authentication with WEP Encryption:
Choose Shared Key and press OK. Go to step g.
Authentication with
Choose
Authentication with LEAP:
Choose LEAP, press OK. Go to step i.
Authentication with
Choose
CHAPv2) or
Choose the appropriate key number and press OK. Enter the WEP key you wrote down in step 17 on page 32 using the dial pad to choose each letter or number.
For example, to enter the letter a, press the 2 key on the dial pad once. To enter the number 3, press the 3 key on the dial pad seven times.
The letters appear in this order: lower case, upper case and then numbers.
(For more information, see Entering Text for Wireless Settings on page 46.)
Press OK when you have entered all the characters, then press 1 for Yes to apply your settings. Go to step k.
Wireless | Windows |
® | |
Network | Macintosh |
| ® |
|
|
33