For Wireless Network Users
h
i
j
k
Press 
or 
to choose TKIP or AES
for Encryption Type? and press OK. Enter the
For example, to enter the letter a, press the 2 key on the dial pad once. To enter the number 3, press the 3 key on the dial pad seven times.
The letters appear in this order: lower case, upper case and then numbers.
(For more information, see Entering Text for Wireless Settings on page 46.)
Press OK when you have entered all the characters, then press 1 for Yes to apply your settings. Go to step k.
Enter the user name and press OK. You can
use 
or 
to move the cursor. For example, to enter the letter a, press the 2 key on the dial pad once.
Enter the password and press OK, and then press 1 to apply your settings. Go to step k. (For more information, see Entering Text for Wireless Settings on page 46.)
Press 
or 
to choose TKIP or AES
for Encryption Type? and press OK. Enter the user name and press OK. You can
use 
or 
to move the cursor. For example, to enter the letter a, press the 2 key on the dial pad once.
Enter the password and press OK, and then press 1 to apply your settings. Go to step k. (For more information, see Entering Text for Wireless Settings on page 46.)
Your machine will now try to connect to your wireless network using the information you have entered. If successful, Connected will appear briefly on the LCD.
If your machine does not successfully connect to your network, verify your network settings collected in step 17 on page 32, then repeat steps a to j to make sure you have entered the correct information.
If your access point does not have DHCP enabled you will need to manually configure the IP address, subnet mask and gateway of the machine to suit your network. See the Network User’s Guide for details.
34