Brother 7050 Step 1

Setting Up Your Printer

Do NOT connect the interface cable.

Connecting the Interface cable is

done when installing the driver.

1Remove the protective part from the paper

exit of the printer.

2Open the multi-purpose tray and lower it gently.

3Remove the protective part from in the

multi-purpose tray.

4Close the multi-purpose tray.

1Open the top cover of the printer.

2Unpack the drum unit assembly.

Remove the protective part.

3Rock it from side to side several times to

distribute the toner evenly inside the

assembly.

4Put the drum unit assembly into the printer.

5Close the top cover of the printer.

1Remove the Protective

Parts

Paper exit Protective part

Multi-purpose

tray

Protective part

2Install the Drum Unit

Assembly

Top cover

Drum unit

assembly

Protective part

Step 1

Contents

Main Quick Setup Guide Version 2 NetworkUSB Setup is Complete! Step 1 Safety Precautions Warning Note To Use the Printer Safely Table of Contents Getting Started Setting Up Your Printer Installing the Driver For USB Interface Cable Users ................................................................10 Regulations EC Declaration of Conformity Manufacture FDA Regulations (110 to 120 volt Model Only) IEC 60825 specification (220 to 240 volt model only) For Finland and Sweden LUOKAN 1 LASERLAITE KLASS 1 LASER APPARAT Internal laser radiation IMPORTANT - For Your Safety Getting Started Carton Components Control Panel + You can find a variety of information on the CD-ROM. Supplied CD-ROM Setting Up Your Printer Step 1 1Remove the Protective Parts 2Install the Drum Unit Assembly 1 2 3Load Paper in the Paper Tray Step 1 1 2 3 4 For USB Interface Cable Users For Administrator .................................................Go to page 28 For Network Interface Users C ANCE L 8 9 2. Setting Your Printer as the Default Printer (For Windows 2000/XP Users Only) 1 2 CANCE L Page For Brother Peer-to-Peer Network Printer Users (LPR) 9 0 A B For Brother Peer-to-Peer Network Printer Users (NetBIOS) 9 0 A B For Network Shared Printer Users 9 0 A Page Page Page For Mac OS X 10.1 Users Page Connecting the Printer to Your Macintosh & Installing the BR-Script PPD File 1 2 3 4 5 6 7 For Mac OS X 10.1 Users Page 28 For Administrator Network Users Guide Chapter Map 1 2 3 4 Setting your IP Address, Subnet Mask and Gateway (Using the Control panel) 1 2 3 Installing the BRAdmin Professional Configuration Utility (Windows Users Only) Print Configuration Page Factory Default Setting Other Information Installing the Driver 3 1 unplug the AC power cord. Options Users Guide Chapter 4. Lower Tray Unit Stabilizer Duplex Unit Mailbox Unit LT-7000 SB-4000 DX-7000 MX-7000 series Network Board (For HL-7050 only) Compact Flash Card DIMM Memory HDD NC-4100h HD-EX Ir-DA Interface Font Package Barcode Font IR-1000 BS-3000 BT-1000