Brother 882-W07 manual 367

STITCH SETTING CHART

STITCH SETTING CHART

The following chart shows information for each utility stitch concerning applications, stitch lengths, stitch widths, and whether or not the twin needle mode can be used.

Note

•Quilting foot “C” is used when the straight stitch needle plate is attached to the machine. Refer to “Using Free motion Quilting Foot “C”” on page 116.

		Presser foot		Stitch width		Stitch length
				[mm (inch)]		[mm (inch)]		Twin
Stitch	Stitch name		Applications
				Auto.	Manual	Auto.	Manual	needle
	Straight stitch		General sewing, gather,
	(Left)		pintuck, etc. Reverse stitch is	0.0	0.0 - 7.0	2.5	0.2 - 5.0	OK
			sewn while pressing “Reverse/	(0)	(0 - 1/4)	(3/32)	(1/64 - 3/16)	( J )
			Reinforcement Stitch” button.
	Straight stitch		General sewing, gather,
	(Left)		pintuck, etc. Reinforcement	0.0	0.0 - 7.0	2.5	0.2 - 5.0	OK
			stitch is sewn while pressing
				(0)	(0 - 1/4)	(3/32)	(1/64 - 3/16)	( J )
			“Reverse/Reinforcement
			Stitch” button.
	Straight stitch		General sewing, gather,
	(Middle)		pintuck, etc. Reverse stitch is	3.5	0.0 - 7.0	2.5	0.2 - 5.0	OK
			sewn while pressing “Reverse/	(1/8)	(0 - 1/4)	(3/32)	(1/64 - 3/16)	( J )
			Reinforcement Stitch” button.
	Straight stitch		General sewing, gather,
	(Middle)		pintuck, etc. Reinforcement	3.5	0.0 - 7.0	2.5	0.2 - 5.0	OK
			stitch is sewn while pressing
				(1/8)	(0 - 1/4)	(3/32)	(1/64 - 3/16)	( J )
			“Reverse/Reinforcement
			Stitch” button.
	Triple stretch		General sewing for	0.0	0.0 - 7.0	2.5	1.5 - 4.0	OK
	stitch		reinforcement and decorative
				(0)	(0 - 1/4)	(3/32)	(1/16 - 3/16)	( J )
			topstitching
	Stem stitch		Reinforced stitching, sewing	1.0	1.0 - 3.0	2.5	1.0 - 4.0	OK
			and decorative applications
				(1/16)	(1/16 - 1/8)	(3/32)	(1/16 - 3/16)	( J )
	Decorative		Decorative stitching, top	0.0	0.0 - 7.0	2.5	1.0 - 4.0	OK
	stitch		stitching
				(0)	(0 - 1/4)	(3/32)	(1/16 - 3/16)	( J )
	Basting stitch		Basting	0.0	0.0 - 7.0	20	5 - 30
							(3/16 - 1-3/	NO
				(0)	(0 - 1/4)	(3/4)
							16)
	Zigzag stitch		For overcasting, mending.
			Reverse stitch is sewn while	3.5	0.0 - 7.0	1.4	0.0 - 4.0	OK
			pressing “Reverse/	(1/8)	(0 - 1/4)	(1/16)	(0 - 3/16)	( J )
			Reinforcement Stitch” button.
	Zigzag stitch		For overcasting, mending.
			Reinforcement stitch is sewn	3.5	0.0 - 7.0	1.4	0.0 - 4.0	OK
			while pressing “Reverse/	(1/8)	(0 - 1/4)	(1/16)	(0 - 3/16)	( J )
			Reinforcement Stitch” button.
	Zigzag stitch		Start from right needle	3.5	2.5 - 5.0	1.4	0.3 - 4.0	OK
	(right)		position, zigzag sew at left.
				(1/8)	(3/32 - 3/16)	(1/16)	(1/64 - 3/16)	( J )
	Zigzag stitch		Start from left needle position,	3.5	2.5 - 5.0	1.4	0.3 - 4.0	OK
	(left)		zigzag sew at right.
				(1/8)	(3/32 - 3/16)	(1/16)	(1/64 - 3/16)	( J )
	2 steps elastic		Overcasting (medium weight	5.0	1.5 - 7.0	1.0	0.2 - 4.0	OK
	zigzag		and stretch fabrics), tape and
				(3/16)	(1/16 - 1/4)	(1/16)	(1/64 - 1/16)	( J )
			elastic

365