28
——————
—————————————————————————————————————————————————————————————————————————————————————————
—
————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————
5
5USING ATTACHMENTS AND APPLICATIONS
CAUTION

Zipper insertion

You can use the zipper foot “I” to sew different types of
zippers, and can easily position it to the right or left side
of the needle.
When sewing with the zipper on the right side, attach
the shank to the left pin of the zipper foot. When sewing
with the zipper on the left side, attach the shank to the
right pin of the zipper foot.
1Right pin for sewing with the zipper on the left
side
2Left pin for sewing with the zipper on the right
side
3Needle drop point for sewing with the zipper
on the left side
4Needle drop point for sewing with the zipper
on the right side
1Prepare the fabric with the zipper basted
on the wrong side.
1Basting stitching
2Reverse stitches
3Wrong side of fabric
4End of zipper opening
5Zipper
2Turn off the machine.
Attach the zipper foot “I”.
CAUTION
3Turn on the machine.
CAUTION
4With the right side of the fabric facing up,
continue sewing with the zipper on the
right side of the presser foot.
1End of zipper opening
2Basting stitching
3Zipper
• Sew t he stitching in order, from 1 to 3.
●Always turn off the machine before replacing the presser foot. Otherwise, injuries may occur
if the foot controller is accidentally pressed and the machine starts sewing.
Stitch Name Pattern Stitch
Length
[mm (inch)] Foot
Straight Stitch
(Center Needle
Position) 3 (1/8) Zipper
Foot “I”
9

I

1
2
3
4
1
2
3
4
1
5
3
4
●Turn the handwheel toward you
(counterclockwise) and check that the
needle does not touch the zipper foot
before you start sewing. Choosing a
different stitch will cause the needle to
hit the presser foot and break, and you
may be injured.
●
Do not turn on the machine while pressing
down the foot controller. The machine
may start unexpectedly and cause
personal injury or damage to the machine.
1
2
3
1
2
3