KNOWING YOUR SEWING MACHINE ————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————————
—
————————————————————————————————————————————————
—————
5
THE MAIN PARTS
1Bobbin winder (Page11)
This winds the thread onto the bobbin for use as the
lower thread.
2Spool pin (Page11, 14)
This holds the spool of thread.
3Thread guide (Page11, 14)
This is used when winding the thread onto the
bobbin and then threading the machine.
4Thread take-up lever (Page15)
5Upper tension-control dial (Page21)
This controls the tension of the upper thread.
6Thread cutter (Page19)
Pass the threads through the thread cutter to cut
them.
7Flat bed attachment with accessory compartment
(Page5)
8Presser foot (Page8)
9Reverse sewing lever (Page10)
Push this lever to stitch in the reverse direction.
0Buttonhole fine-adjustment screw (Page27)
APattern selection dial (Page9)
Rotate the dial in either direction to choose the
stitch you want.
BHandwheel
Used to manually raise and lower the needle.
CMain power and sewing light switch (Page 7)
You can turn the main power and sewing light
switch on and off.
DFoot controller jack / socket (Page6)
Plug in the foot controller plug and connect the
machine to the power supply.
EPresser foot lever (Page14)
Used to raise and lower the presser foot.
FFoot controller (Page7)
You can use this to control the sewing speed, and to
start and stop sewing.
Foot Controller:
Model KD-1902 for 110-120V area
KD-1902 for 110-127V area (Brazil only)
Model KD-2902 for 220-240V area
The foot controller part code differs depending on the
country or region. Contact your dealer or the nearest
authorized service center.

Flat bed attachment

The accessories can be stored in a compartment inside
the flat bed attachment.
1Slide the flat bed attachment to the left to
open it.
1Flat bed attachment
2Storage compartment
1
2
3
4
6
7
8
50
9
D
C
F
A
E
B
1
2