Powerful needle penetration force
A more powerful motor (550W) has been adopted. The needle penetration force is powerful even at low speeds, and there is plenty of power available for sewing thick materials.
Thickness |
Sewing speed
Needle penetration force
Work clamp lift amount can be set on operation panel (Solenoid specification)
As the work clamp operation is controlled by a pulse motor, the work clamp lift amount can be set simply by entering a numeric value at the operation panel without need of using tools. Furthermore, you can use the user programs to set desired work clamp lift amount for each program respectively. No need to adjust the amount at every change of programs.
3 types of work clamp lowering operation (Solenoid specification)
You can select desired work clamp lowering operation from three patterns by changing the memory switch settings.
pressing operation is suitable for occasions when the positioning materials with the work clamp is not necessary while it is positioned with the feed plate beforehand.
Analog dropping: The work clamp comes down in direct proportion to the pedal depression amount without steps. You can lower it with making subtle positioning of materials.
* The factory setting is the
Large-capacity memory capable of storing bulky data
A compact flash (CF) card has been adopted for handling a large amount of data. Read and write speed is fast, which allows multiple data to be copied or moved to other sewing machines or computers for data management.
*The number of patterns and stitches which can be stored depends on the number of stitches for each program.