Brother BE-1206-PC manual Preparation, Cancelling previous design, Embroidery Cancel icon, Title

Models: BE-1204-PC BE-1206-PC BE-1201-PC BES-1262 BE-0901-PC BES-1260 BES-962 BES-960 BES-1240

1 14

Page 1

Title:	Procedures for sewing a DST file using PC
Date:	February 4, 2009
Models:	BE-0901-PC, BE-1201-PC, BE-1204-PC, BE-1206-PC
	BES-960, BES-962, BES-1240, BES-1260, BES-1262

1. Turn on the computer and start the Brother Embroidery Software, ECSC.

(Note: You will not see a white window appear until you turn on the machine.)

(Note: White window will appear.)

3. If using a USB flash drive or floppy disk please insert in to the computer.

Image 1

Contents

Embroidery Cancel icon Cancelling previous designProcedures for sewing a DST file using PC 1. Left click on the Embroidery Cancel iconLeft click on your selection 2. It may ask you if you want to save the design previously loadedThis will save the design in an ECS format Explorer icon Loading a DST file1. Left click on the Explorer icon Page Page 1. Left click on “Settings” SettingsLoading embroidery hoop to use Load HoopNote These two folders are listed under C\Program Files\BES-960 4. Double left click on a hoop filename to load∙ HOOP2 - BE-1204-PC, BE-1206-PC Page Needle Bar Change icon Setting color sequence1. Left click on the “Needle Bar Change” icon 2. The “Needle Bar Change” window appearsPage Page Speed range information Speed adjustment buttons Setting sewing speedSend icon Sending design to the machine2. If “HOOP” is displayed on the machine panel, press Operations on the machine panel3. To trace the design in the hoop, press 4. Press the button to start the machine