WALK-UP PHOTOCAPTURE CENTER™ 6 - 16

Changing the default settings

You can adjust the Print Quality, Print Size, Brightness, Contrast,

Colour Enhance and Scan to Card settings, that are shown in the

chart. These settings will remain set until you change them again.

Press Menu/Set, 3, followed by the number of the setting you want

to change. (See details on the following pages.)

Submenu Menu
Selections Options (1) Options (2) Factory Settings
1.PRINT QUALITY —NORMAL —FINE
FINE
PHOTO
2.PRINT SIZE —13×9CM —15×10CM
15×10CM
18×13CM
20×25CM
3.BRIGHTNESS —- +—- +
- +
- +
- +
- +
4.CONTRAST —- +—- +
- +
- +
- +
- +
5.COLOUR
ENHANCE ON 1.WHITE BALANCE - + (- +)
- +
- +
- +
- +
2.SHARPNESS - + (- +)
- +
- +
- +
- +
3.COLOUR
DENSITY - + (- +)
- +
- +
- +
- +
OFF ——
OFF
6.SCAN TO CARD
(See How to scan
using Windows® on
page 9-1.)
—PDF —PDF
JPEG