78
Packing and shipping
the machine B
CAUTION
If you pack the machine soon after turning
off the power make sure the machine has
cooled down completely.
When you transport the machine, use the
packing materials that came with your
machine. If you do not pack the machine
properly, you could void your warranty. The
machine should be adequately insured with
the carrier.
aTurn off the machine’s power switch.
bUnplug all the cables and AC power
cord from the machine.
cOpen the front cover.
dRemove the drum unit and toner
cartridge assembly. Leave the toner
cartridge installed in the drum unit.
ePlace the drum unit and toner cartridge
assembly into the plastic bag and seal
the bag.
fClose the front cover.
gWrap the machine in the plastic bag and
place it in the original carton with the
original packing material.
hPack the drum unit and toner cartridge
assembly, AC cord and printed
materials in the original carton as shown
below:
Note
If you are returning your machine to
Brother as part of the Exchange Service,
pack only the machine. Keep all separate
parts and printed materials to use with
your “Exchange” machine.
iClose the carton and tape it shut.