Optional paper tray (LT-5400)

An optional lower tray can be installed on the DCP-8150DN and DCP-8155DN, and it can

hold up to 500 sheets of 20 lb / 80 g/m2 paper.

When an optional tray is installed, the machine can hold up to 800 sheets of plain paper.

For setup, see the Instructions that we have supplied with the lower tray unit.

WARNING

If you use a Lower Tray, DO NOT carry the machine with the Lower Tray as you may be injured or cause damage to the machine because it is not attached to the Lower Tray.

40

Memory board

DCP-8110DN and DCP-8150DN have 64 MB of standard memory, and DCP-8155DN has 128 MB. All models have one slot for optional memory expansion. You can increase the memory up to maximum of 320 MB for DCP-8110DN and DCP-8150DN, and 384 MB for DCP-8155DN by installing one SO-DIMM (Small Outline Dual In-line Memory Module).

SO-DIMM Types

For information regarding memory for your Brother machine please visit us at: http://www.brother-usa.com/support/memory/

In general, the SO-DIMM must have the following specifications:

Type

144-pin and 16-bit output

 

 

CAS latency

4

 

 

Clock

267 MHz (533 Mb/S/Pin) or

frequency

more

 

 

Capacity

256 MB

 

 

Height

1.18 in. (30.0 mm)

 

 

DRAM type

DDR2 SDRAM

 

 

Note

•There might be some SO-DIMMs that will not work with the machine.

•For more information, call the dealer you bought the machine from or Brother Customer Service.