Installing extra memory

a Turn off the machine’s power switch.

b Disconnect the interface cable from the machine, and then unplug the power cord from the AC power outlet.

Note

Be sure to turn off the machine’s power switch before you install or remove the SO-DIMM.

c Remove the plastic (1) and then metal (2) SO-DIMM covers.

2

1

Options

e Hold the SO-DIMM by the edges and align the notches in the SO-DIMM with the protrusions in the slot. Insert the SO-DIMM diagonally (1), then tilt it toward the interface board until it clicks into place (2).

1 2

B

f Put the metal (2) and then the plastic (1) SO-DIMM covers back on.

1

d Unpack the SO-DIMM and hold it by its

2

edges.

 

Important

To prevent damage to the machine from static electricity, DO NOT touch the memory chips or the board surface.

41