Introduction
How to register and delete accounts on the machine
| 1 | |
Enter the account information and configure the machine so that it can access the service: | ||
|
Register an account
For
a Before you register an account, confirm that the correct time and date are set on the machine’s control panel. See the Quick Setup Guide included with your machine for instructions on setting the correct time and date.
b Swipe left or right, or press d or c to display the More screen.
c Press Web.
Information regarding the Internet connection is displayed on the machine’s LCD. Read the information and press OK.
d You will be asked if you want to display this information again in the future. Press Yes or No.
e f g h
i A message is displayed prompting you to enter the temporary ID you received when you applied for Brother Web Connect access.
Press OK.
j Enter the temporary ID. Press OK.
NOTE
An error message will appear on the LCD if the information you entered does not match the temporary ID you received when you applied for access or if the temporary ID has expired. Either enter the temporary ID correctly or apply for access again and receive a new temporary ID (see How to apply for Brother Web Connect access on page 6).
k A message is displayed, prompting you to enter a name for the account as you want it to be displayed on the LCD.
Press OK.
l Enter the name using the buttons on the LCD. Press OK.
8