15

Make sure that you followed the instructions in 1 to F on pages 10 to 12.

GWhen this screen appears, connect the
USB interface to your PC, and then connect
it to the DCP. Turn on the DCP by plugging
in the power code.
.
It will take a few seconds for the installation
screen to appear.
The installation of the Brother driver will
automatically start. Follow the instructions
on the screen.
HIf the Digital Signature Not Found dialog
boxes appear, click Yes to install the driver.
IThe README.WRI file will be displayed.
Please read this file for troubleshooting
information and then close the file to
continue installation.
JClick Finish to restart your computer.
KAfter the computer restarts, click Yes to
have the Control Center loaded each time
Windows is started. The Control Center will
appear as an icon in the task tray.
If you click No the Scan to keys on the
DCP will be disabled.
.
The Brother Printer and Scanner
drivers have been installed and the
installation is now complete.
For Windows® 2000 Professional Users Only
Even if you select NO, later you will be able to
launch the Brother Control Center to use the
Scan to
key. See AutoLoad the Brother
Control Center, Chapter 10 in the Documentation
(User’s Guide) located on the CD-ROM.
Go to page 17
Installing the Driver & Software
Setting Up
the DCP
Windows®