13
Make sure that you followed the instructions in 1 to F on pages 10 to 12.
GWhen this screen appears, connect the
USB interface to your PC, and then connect
it to the DCP. Turn on the DCP by plugging
in the power code.
.
It will take a few seconds for the installation
screen to appear.
The installation of the Brother driver will
automatically start. Follow the instructions
on the screen.
HSelect BRUSB: USB Printer Port, and then
click Next.
IAccept the default Printer name by selecting
Yes, and then click Next.
JSelect Yes (recommended), and then click
Finish. A test page will be printed so you
can check the print quality.
KIf the test page is printed correctly, click
Yes. If you click No, follow the prompts on
the screen to correct the problem.
LThe README.WRI file will be displayed.
Please read this file for troubleshooting
information and then close the file to
continue installation.
For Windows® 98/98SE/Me Users Only
To be continued
Step 2
Installing the Driver & Software
Setting Up
the DCP
Windows®