10
Installing the Driver & Software
Make sure that you have completed the instructions from Step 1 “Setting Up
the DCP” on pages 2 to 7.
If you are using Windows® 2000
Professional:
To access the PhotoCapture Centre™ features
from your PC you may have to install a
Windows® 2000 update first.
Install the Windows® 2000 update from the
MFL-Pro Suite installer.
You can install it by following the steps below:
1.Follow the installation steps from 1 to 6.
2.Click OK to start installation of the update.
3.Click OK to restart your PC.
4.After the PC restarts, the installation will
automatically continue.
1Unplug the DCP from the AC outlet and
disconnect it from your computer, if you
already connected an USB cable.
2Turn on your computer.
(For Windows® 2000 Professional/XP, you
must be logged on as the administrator.)
3Insert the supplied CD-ROM into your
CD-ROM drive.
4Click your language.
5The CD-ROM main menu will appear.
Click Install Software.
For Windows® 98/98SE/Me/2000 Professional/XP Users
If you have previously installed the MFL-Pro
Suite, you will first have to unin stall it. Fro m the
Start menu, select Programs, Brother,
Brother MFL-Pro Suite, Uninstall, and then
follow the instructions on the screen.
If the installation does not continue
automatically, please open the MFL-Pro
Suite installer menu again by double-clicking
the setup.exe program from the root
directory of the Brother CD-ROM, and
continue from Step 4 to install the MFL-Pro
Suite.
Make sure any media cards are not inserted
into the media drive of the DCP.
If this window does not appear, use
Windows® Explore to run the setup.exe
program from the root directory of the
Brother CD-ROM.
Step 2