2
Setting Up the DCP
1Remove the protective tape.
Do NOT connect the USB cable.
Connecting the USB cable is done
when installing the driver.
1Pull the scanner cover release lever to open
the scanner cover and lift it to the opening
position.
2Attach the output paper support to the paper
output slot.
3Close the output paper support and the
scanner cover.
4Pull out the extension.
1Insert the paper tray from above into the
back of the DCP.
1Removing the Protective Parts2Attaching the Output Paper Support
Scanner Cover
Scanner Cover
Release Lever
Output Paper
Support
3Attaching the Paper Tray
Output Paper
Support
Scanner
Cover
Output Paper
Support Extension
Paper Tray
Step 1