![](/images/new-backgrounds/1266835/2668357x1.webp)
4
Notes
Need trustworthy, detailed Technical Instructions for another engine? Visit: www. futuregraphicsllc. com
Photo 15
Photo 16
Photo 17
Photo 18
Photo 19
Brother DR-250 Technical Instructions
Step 13
Slide the drum axle out from the drum.
(See Photo 15)
Step 14
Lift out the drum from the cartridge. Remove the gray drive gear from the end of the drum. (See Photo 16)
NOTE: The drive gear will need to be used with the new drum. It is important not to lose the gear.
Step 15
Remove the Philips screw holding the metal gear housing end plate on the side of the cartridge.
(See Photo 17)
Step 16
Release the two locking tabs that hold the gear housing end plate in place.
(See Photo 18)
Remove the gear housing end plate.
Step 17
Remove the large white gear and the developer roller drive gear from the end of the cartridge.
(See Photo 19)