8
Brother DR-250 Technical Instructions
Photo 35
Photo 36
Photo 37
Photo 38
Photo 39
Step 32
Install the white transfer roller saddle onto the contact side of the cartridge. Place the transfer roller into position, atop of the drum.
(See Photo 35)
Step 33
Place the toner agitator gear onto the cartridge.
(See Photo 36)
Step 34
Place the top of the section of the cartridge onto the bottom. Press down till the top of the cartridge snaps into place. Install the two screws that hold the lid in place.
(See Photo 37)
Step 35
Install the two inserts into the two lock- ing taps on top of the cartridge.
(See Photo 38)
NOTE: The two legs on the inserts will face up away from the locking tabs.
Step 36
Slide the toner fill cover plate up so the top of the plate covers the guide tads on the top section of the cartridge.
(See Photo 39)
Step 37
Insert toner cartridge and test.
RESETTING THE DRUM COUNTER
Step 1
Install the jagged end of the clear reset sheet into the cartridge between the drum and transfer roller.
(See Photo 1)
Photo 1
Step 2
Rotate the drum so the reset sheet is fed into the cartridge and the end of the sheet is flush with the end of the cartridge with the jagged end of the sheet sticking out the top of the cartridge. (See Photo 2)
NOTE: Once the sheet is fed through the printer, the machine will reset the drum counter.
Photo 2
Need help with a particular remanu- facturing problem?
Call the Technical Resource Center from 8am - 5pm PST: 800 394.9900
