Setting Up the Machine
8
7 Print quality check
1After the cleaning cycle is finished, the LCD
shows:
Set Paper and
q
Press Start
2Make sure paper is loaded in the paper tray.
Press Start.
The machine starts printing the Print Quality
Check Sheet (only during initial ink cartridge
installation).
3Check the quality of the block on the sheet.
Improper Setup
Avoid touching the printed surface of the
paper immediately after printing, the surface
may not be completely dry and may stain your
fingers.
4The LCD shows:
Is Quality OK?
q
1.Yes 2.No
5Do one of the following:
If all lines are clear and visible, press 1
(Yes) on the dial pad to finish the quality
check.
If you can see missing short lines, press 2
(No) on the dial pad and go to step 6.
6The LCD shows:
Start Cleaning?
q
1.Yes 2.No
7Press 1 (Yes), the machine will then start
cleaning.
8After cleaning is finished, press Start. The
machine starts printing the Print Quality Check
Sheet again and goes back to step 3.
OK Poor