Brother FAX-1560 1, 2, 3, 4, 1, 1, 2 3, 4

Setting Up the Machine

1Insert the connector (1) of the battery (2) in the

direction shown below.

2Place the battery in the position shown.

3Install the battery cover by sliding it onto the

back of the handset.

Note

Be careful that you do not catch the battery

connector cord.

4Charge the battery by leaving the cordless

handset in the cradle for at least 12 hours

before you use it.

You can continue to set up the handset during

this time.

1Place the cordless handset on the cradle with

the dial pad facing forward.

Note

• After installation, you should set the date and time.

(See Date and Time in the DECT™ Handset

User’s Guide.)

• If the battery charge level is getting low, you

should charge the battery.

You can see the battery charge level indicator at

the bottom right of the LCD.

The first time you install the battery, you must set your

country so that the cordless handset works correctly

on local telecommunication lines.

1The LCD shows:

2Press Menu/OK.

3Press a or b to choose your country.

Press Menu/OK.

4Press 1 to confirm.

Note

The LCD of the handset will display “Searching

for Base Unit” or “Base Unit not

detected” until the initial setup of the machine is

complete.