GE Monogram GLD6500 Status Indicator Lights, Control Settings, Safety Instructions, Cycles

Models: GLD5500 GLD4300 GLD5800 GLD4200 GLD6300 GLD6500 GLD6200 GLD4100 GHDA650 EDW6000 GHDA450 EDW5000

1 16
Download 16 pages 24.67 Kb
Page 6
Image 6
1 Status Indicator Lights

Safety Instructions

Operating Instructions

Troubleshooting Tips

Consumer Support

About the dishwasher control panel. (For models without a sensor: EDW5000 Series,

GHDA450 Series, GLD4100 Series, GLD4200 Series, GLD4300 Series, GLD5500 Series, and GLD5800 Series)

You can locate your model number on the tub wall just inside the door. Throughout this manual, features and appearance may vary from your model.

1

 

 

2

4

3

Control Settings

1 Status Indicator Lights

The Status display tells you what’s happening while the dishwasher is in operation and may flash, indicating a malfunction (see page 8). The lights will come ON indicating the sequence of operation the dishwasher is in.

SANITIZED Displayed when cycle has met sanitization conditions. Light remains ON until door is opened.

CLEAN Displayed when a wash cycle is complete. The light stays ON as a reminder that the dishes are clean until the door is opened or until another cycle is selected.

2

 

Cycles

 

 

 

The light above the selected pad will be ON to indicate which cycle has been selected.

 

 

 

 

SANI WASH

7.3 gal., 97 min.

This cycle raises the water temperature in the final rinse to sanitize your dishware. The cycle length will vary depending on the temperature of your inlet water.

NOTE: The SANI-WASHcycle is monitored for sanitization requirements. If the cycle is interrupted during or after the main wash portion or if the incoming water temperature is so low that adequate water heating cannot be achieved, the sanitizing conditions may not be met. In these cases, the sanitized light will not illuminate at the end of the cycle.

NOTE: NSF certified residential dishwashers are not intended for licensed food establishments.

POTS

8.5 gal., 89 min.

& PANS

This cycle is meant for heavily soiled dishes or cookware with dried-on or baked-on soils.

 

Everyday dishes are safe to be used in this cycle.

NORMAL WASH

5.9 gal., 56 min.

This cycle is for medium/heavily soiled dishes and glassware.

LIGHT WASH

6.1 gal., 36 min.

(on some models)

This cycle is for everyday dishes and glassware.

 

 

CHINA CRYSTAL

6.1 gal., 39 min.

(on some models)

This cycle is for lightly soiled china and crystal.

 

 

RINSE ONLY

1.2 gal., 6 min.

For rinsing partial loads that will be washed later. Do not use detergent with this cycle.

NOTE: Only the SANI-WASHcycle has been designed to meet the requirements of Section 6, NSF 184 for soil removal and sanitization efficacy.

6

Page 6
Image 6
GE Monogram GLD6500 Status Indicator Lights, Control Settings, Safety Instructions, Operating Instructions, Cycles