
7 Scanning (For FAX-2940)
Note
Mac OS X 10.5.8 does not support the scan function. Mac OS X 10.6.x - 10.7.x users can use the ICA driver for scanning.
Scanning a document using the ICA driver (Mac OS X 10.6.x - 10.7.x)
You can scan a document using the ICA driver. If you installed available drivers and software from the download page for your machine in the Brother Solutions Center (http://solutions.brother.com/), the ICA driver has been already installed to your Macintosh. If you don’t see your machine in the Print & Fax or Print & Scan list, you can add your machine by clicking the + button. You can also scan directly using the Image Capture application (See Choosing your machine from Print & Fax or Print & Scan uu page 75).
Note | 7 |
|
The screens in this section are from Mac OS X 10.6.x. The screens on your Macintosh will vary depending on your operating system version.
a Connect your Brother machine to the Macintosh using a USB cable.
b Launch Image Capture.c Select the machine from the DEVICES area on the left side of the screen.
Note
(For Mac OS X 10.7.x)
If you cannot see the machine in the DEVICES area, point the mouse pointer over the area, and then click Show.
73