For Wireless Network Users

f Temporarily connect the USB cable (not included) directly to the computer and the machine.

g Do one of the following:

If the Installation confirmation screen

appears, check the box and click Next, and then go to h.

If the Installation confirmation screen does not appear, go to i.

h Check Yes if you want to connect with the listed SSID. Click Next, and then go to k.

i The wizard will search for available wireless networks from your machine. Choose the SSID that you wrote down for your network in step 10-aon page 18, and then click Next.

NOTE

•If the list is blank, check that the wireless access point/router has power and is broadcasting the SSID. See if the machine and the wireless access point/router are within range for wireless communication. Click Refresh.

•If your wireless access point/router is set to not broadcast the SSID, manually add it by clicking the Advanced button. Follow the on-screen instructions for entering the Name(SSID), and then click Next.

j Enter the Network Key you wrote down in step 10-aon page 18, and then click Next.

NOTE

If your network is not configured for Authentication and Encryption, the ATTENTION! screen will appear. To continue configuration, click OK.

k Confirm the wireless network settings, and then click Next. The settings will be sent to your machine.

NOTE

•The settings will remain unchanged if you click Cancel.

•To manually enter the IP address settings of your machine, click Change IP Address and enter the necessary IP address settings for your network.

•If the wireless setup failure screen appears, click Retry.

l

Disconnect the USB cable between the

 

 

 

 

computer and the machine, and then click Next.

 

 

 

 

Wireless setup is now complete.

 

 

 

 

A four-level indicator at the right of your

 

 

 

 

machine’s LCD will show the wireless

 

 

 

 

signal strength of your wireless access

 

 

 

 

point/router.

 

 

 

To install the printer driver, continue to

 

 

 

 

Wireless

Windows®

step 13.

 

 

 

 

For Windows® Users:

 

 

 

 

Now go to

 

 

 

step13-eon page 28

 

Network

Macintosh

step 13-don page 30

 

For Macintosh Users:

 

 

 

 

Now go to

 

 

 

 

 

 

 

 

 

 

21