Wireless Network

Macintosh

 

 

Install the Printer Driver for Macintosh (HL-3140CW / HL-3150CDW / HL-3170CDW)

12 Before you install

IMPORTANT

For users of Mac OS X v10.6.7 or lower: upgrade to Mac OS X v10.6.8, 10.7.x, 10.8.x. (For the latest drivers and information for the Mac OS X you are using, visit http://solutions.brother.com/.)

a Make sure your machine is connected to an AC power source and your Macintosh is ON. You must be logged on with Administrator rights.

13 Install the printer driver

a Put the CD-ROM into your CD-ROM drive, and then double-click the BROTHER icon on your desktop.

b Double-click the Start Here OSX icon. If prompted, select your model.

c Choose Wireless Network Connection, and

then click Next.

NOTE

If your wireless settings fail, the Wireless Device Setup Wizard screen appears. Follow the on-screen instructions to complete the wireless configuration.

d Choose your machine from the list, and then click Next.

NOTE

•If there is more than one of the same model connected on your network, the IP Address will be displayed to help you identify the machine.

•You can find your machine’s IP Address by printing out the Printer Settings Page (see Print the Printer Settings Page on page 31).

e The installation screens appear one after another. If prompted, follow any on-screen instructions.

IMPORTANT

DO NOT cancel any of the screens during the installation. It may take a few minutes for the installation to complete.

f When the Add Printer screen appears, click Add Printer.

g Choose your machine from the list, click Add, and then click Next.

(OS X v10.8.x)

Select HL-XXXX CUPS driver from the Use pop-up menu. (Where XXXX is your model name.)

NOTE

•For HL-3170CDW: to add the PS driver (BR-Script3 printer driver), select it from the Print Using (Use) pop-up menu.

•When the Brother Support screen appears, make your selection and follow the on-screen instructions.

Finish

The installation is now

complete.

30