Printing Methods
2 - 13
ePut paper in the MP tray. Make sure that the paper stays under the maximum paper mark (b) on both
sides of the tray.
Note
• Envelope joints that are sealed by the manufacturer should be secure.
• The side to be printed on must be face up.
• All sides of the envelope should be properly folded without wrinkles or creases.
fWhile pressing the paper-guide relea se lever, slide the paper guide to fit the paper siz e.
gSend the print data to t he printer.
Note
• Re move each sheet or envelope at once after prin ting. Stacking the sheets or envelopes may ca use the
paper to jam or curl.
• If envelopes get smudged during printing set the MediaType to Thick Paper or Thicker Paper to
increase the fixing temperature. To adjust the print density setting, see Printing on thick paper, labels and
envelopes on page 2-11.
• If the envelopes is creased after they are printed, see Improving the print quality on page 7 -13.