For Network Users
BRAdmin Light utility (For Mac OS X users)
The BRAdmin Light is a utility for initial setup of Brother network connected devices. It can also search for Brother products on your network, view the status and configure basic network settings, such as IP Address from a computer running Mac OS X 10.3.9 or greater.
The BRAdmin Light software will be installed automatically when you install the printer driver. If you have already installed the printer driver, you don’t have to install it again. For more information on BRAdmin Light, visit us at http://solutions.brother.com/.
|
|
| c Double click the file BRAdmin Light.jar and | |
Set your IP Address, Subnet Mask | ||||
run the software. BRAdmin Light will then | ||||
and Gateway using BRAdmin Light | search for new devices automatically. | |||
| Note |
|
| |
|
|
| ||
| • If you have a DHCP/BOOTP/RARP server in |
| ||
|
| |||
| your network, you don’t have to do the |
| ||
| following operation. The print server will |
| ||
| automatically obtain its own IP Address. |
| ||
| • Make sure that version 1.4.2 or later of Java |
| ||
| client software is installed on your computer. | d | ||
| • The default password for the print server is | |||
| ‘access’. You can use BRAdmin Light to |
| ||
| change this password. |
|
a
b Choose Library, Printers, Brother and then | e Choose STATIC for the Boot Method. Enter |
Utilities. | |
| the IP Address, Subnet Mask and Gateway, |
| and then click OK. |
f The address information will be saved to the printer.
23