4 Print a test page
IMPORTANT
DO NOT connect the interface cable yet.
a Make sure that the printer power switch is off. Connect the AC power cord to the printer.
b Turn on the printer power switch.
c Unfold support flap1.
d After the printer has finished warming up, the LCD shows READY.
e Press Go. The printer prints a test page. Check that the test page has printed correctly.
Note
This function will not be available after the first print job you send from your computer.
5 | Setting your language on | |||
| the control panel | |||
|
|
|
|
|
|
|
|
|
|
a Press + until the LCD shows SETUP.Press Set.
SETUP
b Press Set again.
LANGUAGE
c Press + or – to choose your language. Press Set to accept.
=ENGLISH
Now go to
Go to the next page to install the printer driver.
5