10
Setting Up Your Printer
Do NOT connect the interface cable.
Connecting the interface cable is
done when installing the driver.
1Make sure that the printer power switch is
off.
Connect the AC power cord to the printer.
2Plug the AC power cord into an AC outlet.
Turn the power switch on.
3After the printer has finished warming up,
the Status LED stops blinking and stays
green.
4Press the Go button. The printer prints a
test page.
Check that the test page has printed
correctly.
4Print a Test Page
Extend the
Support flap.
Go to the next page
to install the driver.
Step 1