Step 2 Installing the Driver & Software

For Windows® 98/98SE/Me/2000 Professional Users

For Windows® 2000 Professional Users

Make sure that you followed the instructions in steps 1 to 12 on pages 12 to 13.

CWhen this screen appears, turn on the MFC by plugging in the power cord.

Connect the Filter core and Cable tie to USB cable.

Connect the USB interface cable to your PC, and then connect it to the MFC.

EThe README.WRI file will be displayed. Please read this file for troubleshooting information and then close the file to continue installation.

F Click Finish to restart your computer.

.

 

G After the computer restarts, click Yes to

 

have the Control Center loaded each time

 

Windows is started. The Control Center will
It will take a few seconds for the installationappear as an icon in the task tray.
screen to appear.If you click No the Scan keys on the MFC
The installation of the Brother driver willwill be disabled. *3
automatically start. Follow the instructions

.

 

on the screen.

 

DIf the Digital Signature Not Found dialogboxes appear, click Yes to install the driver.

.

*3 Even if you select NO, later you will be able to launch the Brother Control Center to use the Scan to key. See AutoLoad the Brother Control Center, Chapter 14 in the On-Line Documentation (User’s Guide) on the CD- ROM.

The Brother PC fax, Printer and Scanner drivers have been installed and the installation is now complete.

16