Setting Up the Machine
13
10 Setting your station ID
You should store your name and fax number to be
printed on all fax pages that you send.
1Press Menu.
2Press a or b to choose Initial Setup.
Press OK.
3Press a or b to choose Station ID.
Press OK.
4Enter your fax number (up to 20 digits) on the
dial pad, and then press OK.
5Enter your name (up to 20 characters) using
the dial pad, and then press OK.
Note
• See the following chart for entering your name.
• If you need to enter a character that is on the same
key as the last character, press to move the
cursor to the right.
• If you entered a letter incorrectly and want to
change it, press or to move the cursor to
the incorrect character, press Clear/Back.
6Press Stop/Exit.
Note
If you make a mistake and want to start again,
press Stop/Exit and go back to step 1.
For details, see Entering Text in Appendixes
C of the User's Guide.
Note
(USA only)
The Telephone Consumer Protection Act of 1991
makes it unlawful for any person to use a
computer or electronic device to send any
message via a telephone fax machine unless such
messages clearly contain, in a margin at the top or
bottom of each transmitted page, or on the first
page of the transmission, the date and time it is
sent and an identification of the business or other
entity or other individual sending the message and
the telephone number of the sending machines or
such business, other entity or individual.
11 Setting tone or pulse dialing
mode
Your machine comes set for Tone dialing service. If
you have Pulse dialing service (rotary), you need to
change the dialing mode.
1Press Menu.
2Press a or b to choose Initial Setup.
Press OK.
3Press a or b to choose Tone/Pulse.
4Press or to choose Pulse (or Tone).
Press OK.
5Press Stop/Exit.
Press
key
One
time
Two
times
Three
times
Four
times
2ABC2
3DEF3
4GHI 4
5JKL5
6MNO6
7PQRS
8TUV8
9WXY Z