Brother MFC-685CW 6, 7, 8, 9, 10 , 11 , 12

Installing the Driver & Software

19

Windows®

USB

Windows®

6After reading and accepting the ScanSoft™

PaperPort™ 11SE License Agreement, click

Yes.

7The installation of ScanSoft™ PaperPort™

11SE will automatically start and is followed by

the installation of MFL-Pro Suite.

8When the Brother MFL-Pro Suite Software

License Agreement window appears, click Yes

if you agree to the Software License

Agreement.

Note

For Windows Vista™, when this screen appears,

click the check box and click Install to complete

the installation properly.

9When this screen appears, go to the next step.

10 Using both hands, use the plastic tabs on both

sides of the machine to lift the scanner cover

until it locks securely into the open position.

11 Insert the USB cable into the USB socket

marked with a symbol. You will find the

USB socket inside the machine on the right as

shown below.

12 Carefully route the USB cable through the

trench and out the back of the machine as

shown below and connect the cable to your

computer.

Improper Setup

• DO NOT connect the machine to a USB port on

a keyboard or a non-powered USB hub.

Brother recommends that you connect the

machine directly to your computer.

• Make sure that the cable does not restrict the

cover from closing, or an error may occur.

• M ake sure you use a USB 2.0 cable that is no

longer than 6 feet (2 meters) long.

Contents

Main Quick Setup Guide MFC-685CW Symbols used in this guide Table of Contents Getting Started STEP 2 STEP 1 Setting Up the Machine Page Getting Started Carton components Getting Started Control panel For the details of the control panel, see Control panel overview in Chapter 1 of the Users Guide. 1 Removing the protective parts 1 2 2 Connecting the handset 1 3 Loading paper 2 3 4 5 6 7 8 4 Connecting the power cord and telephone line 1 2 5 Installing the ink cartridges 1 2 3 No Cartridge Black Yellow Cyan Magenta 4 5 M 6 7 1 2 3 Is Quality OK? Yes Press Press 4 5 6 7 Choosing your language (Canada only) 3 4 8 Setting the LCD Contrast 2 3 4 5 6 9 Setting the date and time 2 3 4 5 6 3 4 5 6 11 Setting tone or pulse dialing mode 3 4 13 Setting up the Message Center 1 2 14 Sending in the Product Registration and Test Sheet (USA only) 1 2 3 4 5 Now go to Supplied CD-ROM MFL-Pro Suite Supplied CD-ROM MFL-Pro Suite Windows Macintosh Windows Installing the Driver & Software For USB Interface Users 2000 Professional/XP/ XP Professional x64 Edition/Windows Vista) 1 2 3 4 5 6 7 8 9 10 13 14 15 16 17 18 19 20 For Wired Network Interface Users 1 2 3 4 5 6 7 8 9 10 11 13 14 15 16 17 18 19 20 21 For Wireless Network Interface Users (For Windows 2000 Professional/XP/XP Professional x64 Edition/Windows Vista) in infrastructure mode Page Using the SecureEasySetup or AOSS software to configure your machine for a wireless networ k 1 2 3 4 5 Using the Setup Wizard from th e control panel LAN menu for wireless network configuration 1 2 3 4 5 6 7 8 9 10 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 1 2 3 4 5 6 7 8 9 10 15 16 For Wired Network Interface Users (For Mac OS X 10.2.4 or greater) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 For Wireless Network Interface Users (For Mac OS X 10.2.4 or greater) in infrastructure mode Page Using the SecureEasySetup or AOSS software to configure your machine for a wireless network 1 2 3 4 5 Using the Setup Wizard from th e control panel LAN menu for wireless network configuration 1 2 3 4 5 6 7 8 9 10 12 13 14 15 16 17 18 19 20 21 22 1 2 Setting your IP address, Sub net Mask and Gateway using BRAdmin Light 1 2 3 4 BRAdmin Light utility (For Mac OS 1 2 3 4 5 Page 52 Entering Text Installing FaceFilter Studio Help Instructions on how to install FaceFilter Studio Help users) Installing FaceFilter Studio Help 1 Consumables Replacement consumables Ink cartridge