Brother MFC-685CW 1, 2, 3, 4

Installing the Driver & Software

35

Macintosh®

Macintosh®

USB

4

For USB Interface Users

(For Mac OS

®

X 10.2.4 or greater)

Important

Make sure that you have finished the

instructions from STEP 1 Setting Up the

Machine on pages 5 thro ugh 15.

Note

•For Mac OS

® X 10.2.0 to 10.2.3 users, upgrade to

Mac OS® X 10.2.4 or g reater. (For the latest

information for Mac OS® X, visit

http://solutions.brother.com)

• Make s ure there are no memory cards or a USB

Flash memory drive inserted into the media drives

or USB direct interface at the front of the machine.

1Using both hands, use the plastic tabs on both

sides of the machine to lift the scanner cover

until it locks securely into the open position.

2Insert the USB cable into the USB socket

marked with a sy mbol. You will find the

USB socket inside the machine on the right as

shown below.

3Carefully route the USB cable through the

trench and out the back of the machine as

shown below and connect the cable to your

Macintosh®.

Improper Setup

• DO NOT connect the machine to a USB port on

a keyboard or a non-powered USB hub.

Brother recommends that you connect the

machine directly to your Macintosh®.

• Make sure that the cable does not restrict the

cover from closing, or an error may occur.

• M ake sure you use a USB 2.0 cable that is no

longer than 6 feet (2 meters) long.

4Lift the scanner cover to release the lock .

Gently push the scanner cover support

down and close the scanner cover .

Contents

Main Quick Setup Guide MFC-685CW Symbols used in this guide Table of Contents Getting Started STEP 2 STEP 1 Setting Up the Machine Page Getting Started Carton components Getting Started Control panel For the details of the control panel, see Control panel overview in Chapter 1 of the Users Guide. 1 Removing the protective parts 1 2 2 Connecting the handset 1 3 Loading paper 2 3 4 5 6 7 8 4 Connecting the power cord and telephone line 1 2 5 Installing the ink cartridges 1 2 3 No Cartridge Black Yellow Cyan Magenta 4 5 M 6 7 1 2 3 Is Quality OK? Yes Press Press 4 5 6 7 Choosing your language (Canada only) 3 4 8 Setting the LCD Contrast 2 3 4 5 6 9 Setting the date and time 2 3 4 5 6 3 4 5 6 11 Setting tone or pulse dialing mode 3 4 13 Setting up the Message Center 1 2 14 Sending in the Product Registration and Test Sheet (USA only) 1 2 3 4 5 Now go to Supplied CD-ROM MFL-Pro Suite Supplied CD-ROM MFL-Pro Suite Windows Macintosh Windows Installing the Driver & Software For USB Interface Users 2000 Professional/XP/ XP Professional x64 Edition/Windows Vista) 1 2 3 4 5 6 7 8 9 10 13 14 15 16 17 18 19 20 For Wired Network Interface Users 1 2 3 4 5 6 7 8 9 10 11 13 14 15 16 17 18 19 20 21 For Wireless Network Interface Users (For Windows 2000 Professional/XP/XP Professional x64 Edition/Windows Vista) in infrastructure mode Page Using the SecureEasySetup or AOSS software to configure your machine for a wireless networ k 1 2 3 4 5 Using the Setup Wizard from th e control panel LAN menu for wireless network configuration 1 2 3 4 5 6 7 8 9 10 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 1 2 3 4 5 6 7 8 9 10 15 16 For Wired Network Interface Users (For Mac OS X 10.2.4 or greater) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 For Wireless Network Interface Users (For Mac OS X 10.2.4 or greater) in infrastructure mode Page Using the SecureEasySetup or AOSS software to configure your machine for a wireless network 1 2 3 4 5 Using the Setup Wizard from th e control panel LAN menu for wireless network configuration 1 2 3 4 5 6 7 8 9 10 12 13 14 15 16 17 18 19 20 21 22 1 2 Setting your IP address, Sub net Mask and Gateway using BRAdmin Light 1 2 3 4 BRAdmin Light utility (For Mac OS 1 2 3 4 5 Page 52 Entering Text Installing FaceFilter Studio Help Instructions on how to install FaceFilter Studio Help users) Installing FaceFilter Studio Help 1 Consumables Replacement consumables Ink cartridge