For Wireless Network Users

Configuration using the Installation CD-ROM and temporarily using a USB cable (Windows® only)

19 Configure the wireless settings

IMPORTANT

•You need to temporarily use a USB cable or Ethernet cable during configuration (cable not included).

•For Windows® 2000 and Windows® XP users

you must have the wireless settings you wrote down for your network in step 18 on page 24 before you proceed.

a Put the installation CD-ROM into your CD-ROM drive. If prompted, select your model and language.

Note

If the Brother screen does not appear automatically, go to My Computer (Computer), double-click the CD-ROM icon, and then double-click start.exe.

b Click Initial Installation and then Install MFL-Pro Suite.

c Click Yes if you accept the license agreement. Follow the on-screen instructions.

d Choose Wireless Network Connection and

then click Next.

Note

For Windows Vista® and Windows® 7, when the User Account Control screen appears, click Allow or Yes.

26

e When this screen appears, choose Change the Firewall port settings to enable network connection and continue with the installation. (Recommended) and click Next.

(Not for Windows® 2000 users)

If you are not using the Windows® Firewall, see the user's guide of your firewall or antivirus software for information on how to add the following network ports.

For network scanning, add UDP port 54925.

For network PC-Fax receiving, add UDP port 54926.

If you still have trouble with your network connection, add UDP port 137.

f Choose No and then click Next.

g Read the Important Notice. Check the box after you confirm the SSID and Network Key, and then click Next.

Note

If you are installing from a wireless PC running Windows Vista® or Windows® 7, check the box and then click next. The installer will automatically detect your wireless network settings.