For Wireless Network Users

One push configuration using Wi-Fi Protected Setup or AOSS™ (Windows® and Macintosh)

19 Configure the wireless settings

a Confirm your WLAN access point/router has the Wi-Fi Protected Setup or AOSS™ symbol as shown below.

b Place the Brother machine within range of your Wi-Fi Protected Setup or AOSS™ access point/router. The range may differ depending on your environment. Refer to the instructions provided with your access point/router.

c On your machine, press Menu, 6 (Network),

2(WLAN), 3 (WPS/AOSS).

When WLAN Enable ? is displayed, press 1 to choose On. This will start the wireless setup wizard.

Otherwise press Stop/Exit to exit from the wireless setup wizard.

When Start WPS/AOSS on your wireless access point/router.

appears, press the Wi-Fi Protected Setup or AOSS™ button on your wireless access point/router. See the user’s guide for your wireless access point/router for instructions. And then press OK.

Note

If your wireless access point/router supports Wi-Fi Protected Setup (PIN Method) and you want to configure your machine using the PIN (Personal Identification Number) Method, see Using the PIN Method of Wi-Fi Protected Setup in the Network User's Guide.

d A connection result message appears on the LCD and a WLAN report will automatically be printed.

If the connection failed, check the error code on the printed report and refer to Troubleshooting on page 31.

Wireless setup is now complete. A four level indicator at the right of your machine’s LCD will show the wireless signal strength of your access point/router.

To install the MFL-Pro Suite, continue to step 20.

For Windows® Users:

Now go to

page 35

For Macintosh Users:

Now go to

page 37

This feature will automatically detect which mode (Wi-Fi Protected Setup or AOSS™) your access point/router uses to configure your machine.

30