5
Setting Up
the Machine
Windows®
USB
Windows®
Parallel
Windows
NT® 4.0
Parallel
Macintosh®
USB
Macintosh®
Network
Windows®
Network
For
Administrators
Do not connect the Parallel or USB
cable yet.
1Make sure that the power switch is off.
Connect the AC power cord to th e machine.
2Plug the AC power cord into an AC outlet.
Turn the power switch on.
3Connect one end of the teleph one line cord
to the socket on the MFC marked LINE and
the other end to a modular wall socket.

Warning

■The MFC must be fitted with an earthed pl ug.
■Since the MFC is grounded through the power
outlet, you can protect yourself from potentially
hazardous electrical conditions on the telephone
network by keeping the power to your MFC on
when you connect it to a telephone line. Similarly,
you can protect yourself when you want to move
your MFC by disconnecting the telephone line first
and then the power cord.
5Install Power Cord and Phone Line
If Check Scan Lock appears on the LCD,
immediately release the scanner lock and
press Stop/Exit.
If you are sharing one phone line with an
external telephone, connect it as shown
below.
If you are sharing one phone line with an
external telephone answering device,
connect it as shown below.
Please set the receive mode to External
TAD.
For more details, see “Connecting the
MFC” in Chapter 1 of the User’s Guide.
Extension
Telephone
External
Telephone
(Example
for the U.K.)
TAD
TAD
(Example
for the U.K.)