Make sure that you have finished the instructions from Step 1 “Setting Up the machine” on pages 4 - 11.
Setting Up the machine
Please close any applications running before installing the
1Turn off and unplug the machine from the AC outlet.
2Turn on your computer.
You must be logged on with Administrator rights.
DO NOT plug in the power cord before connecting the parallel interface cable. It may cause damage to your machine.
3Connect the parallel interface cable to your computer, and then connect it to the machine.
Brother recommends that you connect the machine directly to your computer.
4Plug in the power cord and turn on the machine.
5Put the Supplied
6The
If this window does not appear, use Windows® Explorer to run the setup.exe program from the root folder of the Brother
7After reading and accepting the ScanSoft® PaperPort® 9.0SE License Agreement, click Yes.
The installation of PaperPort® 9.0SE will automatically start and is followed by the installation of
® |
|
Windows | Parallel |
Software | Windows | NT Parallel |
|
| 4.0 |
|
| ® |
Installing the Drivers & |
|
|
Continued ..
Network | Administrators |
19