For Mac OS® X 10.2.4 or greater
Make sure that you have finished the instructions from Step 1 “Setting Up the machine” on pages 4 - 11.
1 Turn off and unplug the machine from the | 7 After the DeviceSelector window appears, |
AC outlet and disconnect it from your | connect the network interface cable to the |
Macintosh® if you already connected an | machine, and then connect it to a free port |
interface cable. | on your hub. |
Setting Up the machine
2Turn on your Macintosh®.
3Insert the supplied
4
5Click
The DeviceSelector window will not appear if | Software& | |
previously installed version of the Brother | ||
you have also connected a USB interface |
| |
cable to the machine before restarting your |
| |
Macintosh®or if you are overwriting a |
| |
software. If you encounter this problem | Drivers | |
to 12. You should select your Brother machine | ||
continue with the installation skipping Steps 9 |
| |
from the Model | the | |
| ||
screen of ControlCenter2. (For details, see the | Installing | |
Software Use’s Guide on | ||
|
8Plug in the power cord and turn on the machine.
® |
|
Macintosh | Network |
6Follow the
Continued ...
Network | Administrators |
31