
Wired Network | Windows® |
Note
•If the installation does not continue automatically, open the top menu again by ejecting and then reinserting the
•For Windows Vista® and Windows® 7 users, when the User Account Control screen appears, click Allow or Yes.
•If you want to install the PS driver
d When the Firewall/AntiVirus detected screen appears, choose Change the Firewall port settings to enable network connection and continue with the installation. (Recommended) and click Next.
(Not for Windows® 2000 users)
If you are not using the Windows® Firewall, see the user’s guide for your software for information on how to add the following network ports.
For network scanning, add UDP port 54925.
For network
If you still have trouble with your network connection, add UDP port 137.
e Follow the
IMPORTANT
DO NOT cancel any of the screens during the installation. It may take a few seconds for all screens to appear.
Note
•If your machine is not found over the network, confirm your settings by following the
•You can find your machine’s IP address and the node name by printing out the Network Configuration List. See Print the Network Configuration List on page 23.
•For Windows Vista® and Windows® 7 users, when the Windows Security screen appears, click the check box and click Install to complete the installation correctly.
•If an error message appears during the software installation, run the Installation Diagnostics located in start/All
If you want to use your machine with multiple computers on the network, install
Note
Network license (Windows®)
This product includes a PC license for up to
5 users. This license supports the installation of the
Finish | The installation is now |
complete. |
Wired | ®Windows |
Network |
|
Macintosh | |
|
|
19