Other Information
Color Correction (if needed)
Color Calibration
The output density for each color may vary depending on the environment the machine is in, such as temperature and humidity. Calibration helps you to improve the color density.
Note
•If you print using the Direct Print feature or the
•If you print using the Windows® printer driver, the driver will get the calibration data automatically if both Use Calibration Data and Get Device Data Automatically are on. See Advanced tab in the Software User's Guide.
•If you print using the Macintosh printer driver, you need to perform the calibration using Status Monitor. After turning Status Monitor on, choose Color Calibration from Control menu. See Status Monitor in the Software User's Guide.
Using the control panel
a Press Menu, 4, 6.
b Press a or b to choose Calibrate. Press OK.
c Press 1 to choose Yes. d Press Stop/Exit.
You can reset the calibration parameters back to those set at the factory.
a Press Menu, 4, 6.
b Press a or b to choose Reset. Press OK.
c Press 1 to choose Yes. d Press Stop/Exit.
24
Color Registration
Auto Registration
You can adjust the print position of each color automatically.
a Press Menu, 4, 7.
b Press 1 to choose Start.
c Press Stop/Exit.
To adjust the print position of each color manually, see Manual Registration in the Advanced User's Guide.
Brother CreativeCenter Icon
Get inspired.