Disposing of this printer

Before disposing of this printer, be sure to remove the built-in lithium ion battery.

Removing the lithium ion battery

1Turn off the printer, and then disconnect the AC adapter.

2Using a screwdriver, loosen the four screws at the back of the printer, and then remove the back cover.

Lithium ion battery

Connector

3Disconnect the connector, and then remove the lithium ion battery.

•Removing the back cover will void the warranty.

Do not remove the back cover unless the printer is to be disposed of.

•The lithium ion battery is attached to the printer with adhesive tape. When removing the lithium ion battery, grasp it, and then pull it off of the printer. Be careful not to pull on the cable.

•When unplugging the connector, do not pull on the cable.

•Risk of explosion if battery is replaced by incor- rect type Dispose of used batteries according to local regulations concerning special waste.

16