Configuring your machine for a wireless network
21
3
hAfter a few tens of seconds, you can select the SSID from the list using a or b. Press OK to select the
SSID.
If you select the SSID displayed, go to k.
If you want to add a new SSID, go to i.
iSelect <New SSID> using a or b.
Press OK. Go to j.
jEnter the SSID. (For information how to type text, see Entering Text on page 122.)
Press OK. Go to k.
kUsing a or b, select Infrastructure when instructed.
Press OK. Go to l
If you select Ad-hoc, go to m.
lSelect the Authentication method using a or b, and press OK.
If you select Open System, go to m.
If you select Shared Key, go to n.
If you select WPA/WPA2-PSK, go to q.
mSelect the Encryption type, None or WEP using a or b, and press OK.
If you select None, go to s.
If you select WEP, go to n.
nSelect the key option; KEY1, KEY2, KEY3, KEY4 using a or b, and press OK.
If you select the key which shows **********, go to o.
If you select a blank key, go to p.
oIf you want to change the key you selected in n, press a or b to select Change. Press OK. Go to p.
If you want to keep the key you selected in n, press a or b to select Keep. Press OK. Go to s.
pEnter a new WEP key. Press OK. Go to s. (To manually enter the text, see Entering Text on page 122)
qSelect the Encryption type, TKIP or AES using a or b. Press OK. Go to r.
rEnter the password and press OK. Go to s. (To manually enter the text, see Entering Text on page 122)
sThe following will be displayed.
To apply the settings, select Yes. To cancel, select No.
If you select Yes, go to t.
If you select No, go back to h.
tThe machine starts to connect to the wireless device you have selected.
uIf your wireless device is connected successfully, the display shows Connected for 2 seconds and
configuration is completed.
If the connection failed, the display shows Connection Error for 2 seconds. See Wireless network
troubleshooting on page 109.