SEWING THE STITCHES
90
f
ff
fRemove the basting stitches and turn the

fabric over.

aWrong side of fabric
bRight side of fabric

■If the Needle does not Catch the

Fold

Adjust the width so that the needle slightly catches
the fold by pressing in the width display.

■If the Needle Catches Too Much of

the Fold

Adjust the width so that the needle slightly catches
the fold by pressing in the width display.
Appliqué
a
aa
aUse a temporary spray adhesive, fabric glue

or a basting stitch to attach the appliqué to

the fabric.

* This will keep the fabric from moving during
sewing.
aAppliqué
bFabric glue
b
bb
bSelect or .
* Adjust the stitch length and width to correspond to
the appliqué shape, size, and quality of material (see
page 49).
c
cc
cAttach presser foot “J”. Check that the

needle drops slightly off the edge of the

appliqué, then start sewing.

aAppliqué material
aNeedle drop position
Memo
Blind hem stitches cannot be sewn if the left
needle drop point does not catch the fold. If
the needle catches too much of the fold, the
fabric cannot be unfolded and the seam
appearing on the right side of the fabric will be
very large, leaving an unattractive finish. If you
experience either of these cases, follow the
instructions below to solve the problem.
a b
Memo
For details on each stitch, refer to the
“STITCH SETTING CHART” at the end of this
manual.
b
a
a