Brother NC21SE Attaching Embroidery Foot W , CAUTION

BEFORE EMBROIDERING
Embroidery
145
5
Attaching Embroidery Foot “W”
a
aa
aPress the “Needle Position” button to raise
the needle.
b
bb
bPress .
→The entire screen becomes white, and all keys and
operation buttons are locked.
c
cc
cRaise the presser foot lever.
d
dd
dPush the black button on the presser foot
holder and remove the presser foot.
aBlack button
bPresser foot holder
→Remove the presser foot from the presser foot
holder.
e
ee
eUse the included screwdriver to loosen the
screw of the presser foot holder, then
remove the presser foot holder.
aScrewdriver
bPresser foot holder
cPresser foot holder screw
→Remove the presser foot holder.
f
ff
fPosition embroidery foot “W” on the
presser foot bar so that the arm of
embroidery foot “W” is behind the needle
holder and the wiper is behind the needle.
aArm
bNeedle holder
cPresser foot holder screw
dWiper
CAUTION
•When attaching a presser foot, always press
on the screen. You may accidentally
press the “Start/Stop” button and possibly
cause injury.
•Be sure to use embroidery foot “W” when
doing embroidery. Using another presser foot
may cause the needle to strike the presser foot,
causing the needle to bend or break and
possibly cause injury.
a
b
a c
b
c
a
b
d