Brother NC21SE Changing the Size

EDITING STITCH PATTERNS
124
Changing the Size
Select a stitch pattern, then press to change the size of the stitch pattern. The stitch pattern will be
sewn in the size highlighted on the key.
Actual Stitch Pattern Size
iSingle/Repeat sewing
key
Press this key to choose single stitches or continuous stitches. 125
jElongation key When 7mm satin stitch patterns are selected, press this key to choose from 5
automatic length settings, without changing the stitch zigzag width or stitch
length settings.
125
kSize selection key Use this key to select the size of the stitch pattern (large, small). 124
lThread density key After selecting the stitch pattern, use this key to change the thread density of the
pattern.
126
mDelete key When you make a mistake selecting a stitch pattern, use this key to delete the
mistake. When you make a mistake in combining stitch patterns, use this key to
delete stitch patterns.
118, 119
nMemory key Use this key to save stitch pattern combinations. 136-137
oStitch width and stitch
length key
Shows the stitch width and stitch length of the selected stitch pattern. The
machine has default settings.
49-50
pThread tension key Shows the thread tension setting for the selected stitch pattern. The machine
has default settings.
50
Memo
•If you continue entering stitch patterns after changing the size, those patterns will also be sewn in that
size.
•You cannot change the size of combined stitch patterns once the stitch pattern is entered.
No. Display Key Name Explanation Page
LS
LS