18
EXAMPLE
You can choose from nine different character styles to apply to your text.
☞
Characters printed using the smaller sizes may be difficult to read if certain style set-
tings (e.g., ITALIC+SHADOW) are selected.
The following style settings are available:
NORMAL, OUTLINE, BOLD, SHADOW, ITALIC,
ITALIC+OUTLINE, ITALIC+BOLD, ITALIC+SHADOW, VERTICAL
The default style setting is NORMAL. The style indicator at the bottom left of the display
shows the current style setting when any setting other than NORMAL is selected.
Refer to
Reference
at the end of this section for samples of the available settings.
To change the style setting:
1While holding down f, press 2 once, and keep f held down to display the
current style setting.
2While still holding down f, continue pressing 2 until the desired style setting is
displayed.
3Release f to apply the selected style setting to the entire text.
To select SIZE3:
1While holding down f, press 1
once, and keep f held down.
2While still holding down f, continue
pressing 1 until SIZE3 is displayed.
3Release f.